Intex Debris / Weather Cover for 12ft Frame Pools #28031 by Amazon.co.uk
- • Vinyl, material thickness 0.18 mm
- • Custom-fit for INTEX frame pools
- • Fastening with a surrounding cord
- • Side overhang approx. 25 cm
- • Integrated drainage holes
Description
Pool cover suitable for Intex Easy Set Metal Frame Ø 366 cm. Material: high-quality polyethylene. Overhang: 30 cm. Secures with a rope
Instructions for use
Make sure the debris pool cover is the correct size for the above ground pool
Two persons are need when installing the cover over the pool
Slowly extend the cover over the pool and tighten the cover rope tie by waking around the pool and gently pulling the rope tie towards the end where the ropes meet. Shift the pool cover overhang so that the rope tie can slide easily. Do not use excessive force
The main purpose of the drain holes on the cover is to prevent water accumulation, especially when a rainfall. Remove any standing water first if any before removing the pool cover in order to minimize damage to the pool cover
The pool cover will sink a little bit due to the weight of the pool cover. This is normal and will not affect the function of the pool cover. Consumers may consider placing an inflatable swimming ring/tube in the center between the cover and the water surface
Box Contains
1 x cover 1 x security rope 1 x instruction manual
Product information
- Size:366x366x25 cm
- Colour:Blue
- Material:Vinyl,Polyethylene,Metal
- Product dimensions:3.66L x 3.66W metres
- Style:Protection
- Product Dimensions:105 x 305 x 270 cm; 3.39 Kilograms
- Part number:28031
- Item display height:25 centimetres
- Item display length:366 centimetres
- Item display width:366 centimetres
- Item display weight:3.1 Kilograms
- Material type:Vinyl,Polyethylene,Metal
- Item volume:1 Cubic Centimetres
- Department:Unisex-adult
- Manufacturer:Intex
- Item model number:28031
- ASIN:B0055CIC26
Related products to Intex Debris / Weather Cover for 12ft Frame Pools #28031:
Explore other categories
Other products from Covers:
