Kaleurrier Gas Lift Cylinder,Pneumatic Chair Replacement Parts- Chair or Stool Lifting Control Mechanism, 500 lbs Heavy Duty Steel Case,Chromcraft,Universal size (6.25" stroke) by Amazon.co.uk
- • \U0001f389Safe,Sturdy and Durable - with official SGS test and certification,Kaleurrier gas lift cylinder Used high quality materials & thickened outer steel to make sure it meets the quality standard.It Supports 400 lbs max weight based on 3 Years warranty - much heavy duty than normal gas cylinder.
- • \u2728Chair Saver - If your chair or stool starts sinking, leaking gas or failing,SAVE MONEY by purchasing our gas cylinder as replacement instead of buying a whole chair or stool painfully!
- • \U0001f4abUniversal size - Outer cylinder diameter: 2 inches, Inner cylinder diameter: 1.1 inches.Applicable for 2 inches(50mm) diameter center hole base,1.1\u201dplate hole under seat cushion,fits most office chairs, task chairs, executive chairs,drafting stools,office & salon stools, etc. Warm Tip:Please better measure your existing chair or stool before you purchase the gas cylinder,make sure it is the correct size to fit your chair or stool.
- • \U0001f4a5Lift Freely & Long Extension - Minimum length 12 Inches,maximum length when fully extended:18.25 Inches.Cylinder functions:Adjust chair or stool height by 6.25 inches & Rotate seat in 360 degree,can be raised and lowered smoothly and noiselessly.
- • \U0001f497Easy Installation - Can be installed easily without additional tools and screws required.
Description
Our Gas Lift Cylinder for Chairs/Stools is a high quality and durable product, suitable for various office chairs, task chairs, executive chairs, drafting stools, office & salon stools, etc. Its outer steel has a diameter of 2 inches, while its inner shaft is 1.1 inches. This gas lift fits users of different heights. The cylinder fits a 2 inches diameter center hole base and 1.1" seat plate hole(control mechanism) in a universal size, meeting ANSI/BIFMA X5.1 & EN 1335 General-Purpose Office Chairs standard, used high-quality materials and can handle different air pressures. With official SGS test and certification, the Kaleurrier gas lift cylinder meets our company\'s high-standard quality standard and works smoothly, without leaking or failing. Kaleurrier is also your great choice to save money and avoid buying a new chair. Our Kaleurrier gas lift fits many chairs with a variety of hole types or seat plate sizes. It provides an adjustable height range by using our chair\'s existing mechanics or adding your desired height and is an alternative solution for chairs with failed lifting mechanisms or sinking and leaking chairs without causing the entire structure to fail. This Kaleurrier gas lift cylinder\'s minimal height requirement of 12 inches fits most of them, and a max. of 18,25 inches fully extended stroke can change it fully height of up to your requirement.
Product Type:
Product and
Kaleurrier Gas Lift Cylinder - The overall height and width of this gas lift for chairs is approximately 160 grams (meeting your table legs with chair,height can adjusts in any way without failure to break chair\'s structures), while other lest companies have higher than this standard and is also much bigger/smaller size that causes chairs\'structural failing or safety issues.
Fastest Action - Once it\'s installed on the table and a pilot ball has been used in place of gas cartridge and turned into 90-degrees by hand to seat and locked with claws of ball release device.The gas will go back and flow with low and steady pressure in only 6-21 minutes time. No more wait, no extra cost, with easy installation - just what you need! Kaleurrier is your perfect partner in solving a new problem on this product for office furniture, meeting any chair requirement quickly with peace of mind without failure ever occur in gas lifts which we\'re produced by high-standard quality in many models as possible for all clients.
Note:Our products come with a trial service within 90 days of purchase, to ensure your purchase\'s high standard of performance in quality,safety and convenience. Kaleurrier guarantee to its customer of best solution as always in a year to provide full return or replace a lost.
Explanation:
We\'re so sure about our products that they are built using quality materials to ensure safety for our customers\' offices, while many chair brands claim they are similar with much of poor standards.But as we all understand the difference and price range for office chairs in this product that makes us your ideal option for safety- conscious furniture and for your cost of this kind gas lift product with a 30- day return period
Product information
- Colour:Chrome
- Brand:Kaleurrier
- Special feature:
- Material:Alloy Steel
- Pattern:Solid
- Model Number:KRE
- Product Dimensions:5.08 x 5.08 x 30.48 cm; 1.04 Kilograms
- Special Features:
- Item Weight:1.04 kg
Related products to Kaleurrier Gas Lift Cylinder,Pneumatic Chair Replacement Parts- Chair or Stool Lifting Control Mechanism, 500 lbs Heavy Duty Steel Case,Chromcraft,Universal size (6.25" stroke):
Explore other categories
Other products from Desk Chairs:
