Cooler Master MasterCase H500P Mesh ARGB - PC Case with Dual 200mm Fans for High-Volume Airflow, Builder-Focused Chassis Panels, Liquid Cooling Ready by Amazon.co.uk
- • DUAL 200MM ARGB FANS - Two massive 200mm MF200R RGB fans draw high-volume airflow into the case for superior cooling (includes an additional 140mm fan at the back) - fully compatible with RGB-certified motherboards (ASUS Aura, Gigabyte Fusion, MSI Mystic Light, and ASRock) for comprehensive ARGB lighting.
- • BUILDER FOCUSED - A DIY or case modding dream, the front mesh intake panel, transparent top exhaust panel, and both side panels can be easily taken off - perfect for creative people looking to personalise their PC.
- • TEMPERED GLASS SIDE PANEL - The easy-to-remove light-grey tinted side panel combined with minimalist CPU cut out cover, PSU shroud, and clean cable management covers with dedicated routing creates a minimalist frame in which to showcase the hardware inside. Supports E-ATX* (*12" x 10.7" will limit cable management features) , ATX, Micro-ATX, and Mini-ITX motherboards - features 2 additional PCI slots at the rear to better highlight graphics cards.
- • LIQUID COOLING READY - The H500P accommodates liquid coolers with radiators up to 360mm in length either within the top panel or behind the front mesh.
- • ACCESSIBLE I/O PANEL - Features 2 x USB 3.2 (formerly USB 3.0) ports, 2 x USB 2.0 ports, 1 x 3.5mm audio jack, 1 x 3.5mm mic jack, ARGB Controller and 1 x 2-to-3 ARGB Splitter
Description
Cooler Master MasterCase H500P Mesh ARGB - PC Case
Two massive 200mm MF200R RGB fans draw high-volume airflow into the case for superior cooling - fully compatible with RGB motherboards for comprehensive ARGB lighting.
A DIY or case modding dream, the front mesh intake panel, transparent top exhaust panel, and both side panels can be easily taken off - perfect for creative people looking to personalise their PC.
Tempered glass side panel and concealed panels frame the internal hardware. Supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards - includes 2 extra PCI slots to better highlight graphics cards.
The H500P accommodates liquid coolers with radiators up to 360mm in length either within the top panel or behind the front mesh.
Features 2 x USB 3.2 (formerly USB 3.0) ports, 2 x USB 2.0 ports, 1 x 3.5mm audio jack, 1 x 3.5mm mic jack, ARGB Controller and 1 x 2-to-3 ARGB Splitter
Two 200mm RGB Fans + Airflow-Optimized Front Mesh Panel
Maximum airflow is ensured with a complete mesh front panel, providing plenty of air intake for the two pre-installed 200mm ARGB fans.
Can be assigned either directly through the motherboard or via a manual controller to create a comprehensive ARGB lighting system.
Builder-Friendly Case
The H500P's design allows for easy disassembly. The front, top, and both side panels can be easily removed, ideal for CaseModders looking to paint their PC.
Ultra Clear & Clean Display
A PSU shroud, CPU cut out covers and additional cable covers take clean cable management to the next level.
Gaming hardware, custom-loop cooling, and the pure pride of the builder is shown in panoramic view through an edge-to-edge tempered glass side panel.
Mind Blowing Design
✓ Massive 200 mm RGB/ARGB fans
✓ Designed to showcase hardware
✓ User-friendly & easy to customize
Liquid Cooling Ready
The MasterCase H500P Mesh ARGB can accommodate up to a 360mm radiator in the top and front panel.
Fan/Radiator module options:
Front panel: 3 x 120/140mm / 2 x 200mm
Side panel: 3 x 120/140mm / 2 x 200mm
Rear panel: 1 x 120/140mm
Easy Access to Ports & ARGB Control
I/O panel includes:
2 x USB 3.2 Gen 1 (formerly USB 3.0)
2 x USB 2.0
1 x 3.5mm Audio Jack
1 x 3.5mm Mic Jack
1 x ARGB Controller
1 x ARGB 2-to-3 splitter.
Vertical Graphics Card Display
Two additional PCI slots at the rear enable builders to show off a graphics card in the vertical position (additional riser cable needed)
Hardware Capacity
GFX Clearance: 412mm
CPU Cooler Clearance: 190mm
Motherboards: Mini ITX, Micro ATX, ATX, E-ATX
PSU Support: ATX, Bottom mount
Case Size
Mid Tower
Mid Tower
Full Tower
Series
MasterCase
MasterCase
Cosmos
Material
Steel, Tempered Glass, Mesh
Steel, Tempered Glass, Aluminium
Steel, Tempered Glass, Aluminium
Motherboard Support
Mini ITX, Micro ATX, ATX, E-ATX*, (*support for up to 12" x 10.7")
Mini ITX, Micro ATX, ATX
ATX, Micro ATX, Mini ITX, E-ATX
Expansion Slots
7+2 (Supports vertical graphics card installation)
9+2
8
Lighting Support
ARGB
RGB
Case Dimensions
544 x 242 x 542mm
544 x 242 x 574mm
639 x 306 x 651mm
Pre-Installed Fans
200mm x 2 (Front), 140mm x 1 (Rear)
200mm x 2 (Bottom)
140mm x 2 (Front), 140mm x 1 (Rear)
PSU Support
Bottom Mount, ATX
Front Top Mount, ATX
Bottom Mount, ATX PS2 / EPS 12V
Product information
- Brand:Cooler Master
- Motherboard compatibility:H500P Mesh
- Case type:Mid Tower
- Colour:ARGB
- Material:Tempered Glass
- Cooling method:Air
- Model name:MCM-H500P-MGN-S11
- Fan size:200 Millimetres
- Item weight:24.9 Pounds
- Item dimensions L x W x H:54.4 x 24.2 x 54.2 centimetres
Related products to Cooler Master MasterCase H500P Mesh ARGB - PC Case with Dual 200mm Fans for High-Volume Airflow, Builder-Focused Chassis Panels, Liquid Cooling Ready:
Other products from Computers & Accessories:
