33PCS Damaged Screw Extractor Set, VMAN Stripped Screw Extractor Kit Broken Screw Removal Tool, Easy Out Stripped Broken Screw or Bolt 2-12mm, 64-65 HRC Hardness, Separate Burnish & Extract Bits by Amazon.co.uk
- • [Scope of Delivery] 10* Drill Bit, 10* Screw Extractor Bit, 3* Phillips Screwdriver, 3* Torx Screw driver, 2* Hex Screwdriver, 2* Slotted Screwdriver, 2* Extension Bit Holder, 1* Socket Adapter. Screw extractor tool help you to remove the damaged screw or bolt of different sizes (2-12mm).
- • [Powerful Function ] Damaged screw remover tool works with electric hand drill, suitable for any size screws or bolts, such as stripped screws, broken or damaged screws, Allen bolts, Machine screws, Lag bolts, Wood screws, Hex bolts, Sheet metal screws, Rounded Bolts.
- • [S2 steel high-quality material] Made of S2 Steel is Damaged Screw Remover Set with excellent rust and corrosion resistance. The hardness can reach 62 HRC with high abrasion resistance and toughness, suitable for general screw removal use, such as Slot, Torx, Cross, Phillips, Hex. The bits are engraved with model for a quick overview and identification of the correct bit type.
- • [Easy Usage] 1) Select a drill bit (burnished side) smaller than the damaged screw and Drill clockwise a hole in the damaged screw head, 2) Flip the Bit (spiral side), 3) Extract with slight pressure on the screw counter-clockwise.
- • [Complete Guarantee] VMAN stripped screw remover set comes with a 6-month warranty and 24-hour customer service support. This DIY Hand Tool can be wrapped as a gift for your husband, father, dad, friend, handyman, or handywoman.
Description
20PCS Damaged Screw Extractor Tool:
Drill Bits (Dr):
#1, #2, #3, #4, #5, #6, #7, #8, #9, #10
Extract Bits (Ex):
#1, #2, #3, #4, #5, #6, #7, #8, #9, #10
Application:
Damaged Screw Remover and Extractor Set for broken bolt and screw
Material:
S2 Steel
Hardness:
up to 62 HRC
TIPS FOR USAGES
- We would advise using an ELECTRIC HAND DRILL
rather than a hammer drill or manual screwdriver to take out the damaged screw or bolt.
- Make sure that the electric hand drill is set to REVERSE
mode before use.
- Damaged screw remover set must be used VERTICALLY
at a LOW SPEED
.
ADAPTER & EXTENSION BIT HOLDER
Socket Adapter:
Fits bits size #6 - #10 and screwdriver bits. -The removal of small screws can be made more precise and easier.
Socket Extension Bit Holder:
Fit bits size #1 - #5. -Not only does it allow for the removal of screws in tight spaces, but it is also more stable when in use.
PRACTICAL SCREW EXTRACTOR SET
This easy out damaged screw extractor kit can remove stripped, broken, rusted or damaged screws or bolts. It also suitable for any size screws or bolts, Allen bolts, Machine screws, Lag bolts, Wood screws, Hex bolts, Sheet metal screws, Rounded Bolts. Meet your different screw removal needs.
LIGHTWEIGHT SCREW REMOVER SET
Striped screw extractor set is equipped with a hard plastic box (Size: 12.5 x 7.5 x 3.5cm
). It is easy to carry, you can put it in bag, pocket or tool box. There are detailed instructions on the box. Ideal gift for dad, husband and friends.
ADDED SCREWDRIVER BITS TO MEET MORE APPLICATION NEEDS
VMAN Damaged Screw Extractor Set also comes with commonly used screwdriver head models, so you can use it in more occasions.
10PCS SCREWDRIVER BITS:
for Torx Screw:
T10H, T15H, T20H
for Hex Screw:
H4.0, H6.0
for Slotted Screw:
-4.0, -6.0
for Phillips Screw:
PH1, PH2, PH3
Package Included:
20* Damaged Screw Extractor Set (Dr#1 - #10, Ex#1 - #10)
10* Screwdriver Bits
2* Extension Bit Holder
1* Socket Adapter
1* Storage box
Drilling the Screw
Step 1
Please press the reverse button on the drill to prepare the electric drill for use.
Step 2
Select a drill bit slightly smaller than the screw.
Hold the drill bits up to the screw or fastener you need to remove. The right one will be slightly wide than the screw head.
Step 3
Line the drill bit up with the center of the screw. Place the drill bit in the divot you created earlier. Move slowly as you begin to drill. Too much force will damage the screw. Focus on holding the drill bit steady so it drills straight down into the screw head.
Step 4
Drill a hole for the extractor. You will need to drill somewhere between 1⁄8 inch (3.2 mm) and 1⁄4 inch (6.4 mm) into the screw head. The depth depends on the screw extractor you have. Hold up the extractor to compare it to the hole you drilled. If the extractor doesn’t fit, keep drilling to widen the hole.
Pulling out the Screw
Step 1,
Insert the extractor into the drilled hole. The spiral end of the extractor goes into the hole. You can tap it with a hammer to make sure it’s in there, but don’t force it.
Step 2,
Twist the extractor with a wrench or drill. Grip the top of the extractor with a wrench. Continue to twist it counterclockwise until the screw pops free. Many extractors are designed to work with drills. Attach the free end of the extractor to the drill and turn on the drill to turn the screw counterclockwise.
Product information
- Manufacturer:VMAN
- Part Number:Damaged Screw Extractor Set
- Product Dimensions:12.5 x 7.5 x 3.5 cm; 245 Grams
- Item model number:Screw Extractor Set
- Size:klein
- Colour:Grey1
- Finish:Steel
- Material:S2 Steel
- Number Of Pieces:33
- Included Components:Screw Head Extractor
- Batteries included?:No
- Batteries Required?:No
- Item Weight:245 g
Related products to 33PCS Damaged Screw Extractor Set, VMAN Stripped Screw Extractor Kit Broken Screw Removal Tool, Easy Out Stripped Broken Screw or Bolt 2-12mm, 64-65 HRC Hardness, Separate Burnish & Extract Bits:
Explore other categories
Other products from Screwdriver Bit Sets:
