Gigabit 90W PoE++ Injector Adapter, IEEE 802.3bt PoE Standard 54-56V Active POE+ 10/100/1000Base-T, Plug and Play for Wireless Access Points/PTZ/Videophones by Amazon.co.uk
- • \u301090W PoE++ Injector\u3011Up to 90W Gigabit PoE++ Injector, with one Ethernet Input (data only) port and one Output (data + power) port. PSE90G supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones, safe and reliable power to WLAN access points.
- • \u3010Complies with IEEE 802.3bt\u3011It complies with IEEE 802.3bt PoE standard, supports 10/100/1000Base-T LAN environment. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points.
- • \u3010Auto-Sensing Technology\u3011This POE Injector can detect both POE and non-POE devices. It will communicate with the device and provide an appropriate power source, for non-standard POE equipment, it will automatically detect and actively shut down to protect the equipment. And Safe on Low Power Devices Receive Only the Power They Need.
- • \u3010Plug and Play without Setting\u3011Only need to connect a PoE network device, which is suitable for most installation scenarios. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don\u2019t need to use AC power adapters anymore. Unique interlock function, easy to install.
- • \u3010Multiple Protections\u3011Overcurrent protection, overcharge protection, overvoltage protection and anti-interference protection.
Compare Gigabit 90W PoE++ Injector Adapter, IEEE 802.3bt PoE Standard 54-56V Active POE+ 10/100/1000Base-T, Plug and Play for Wireless Access Points/PTZ/Videophones with other products:
Description
Standards Compliance
IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-Tx Fast Ethernet, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet
Connector
RJ-45 10/100/1000 Mbps
Pin Assignment and Polarity
1/2(+), 3/6 (-)
Input Power AC Input Voltage
100~240 VAC
Indicators
AC Power (Orange) / PoE (Green)
Operating Temperature
-20 ~55\xb0C
Storage Temperature
-25 ~ 70\xb0C
Dimensions (L x W x H)
144mm x 57mm x 40mm (5.62in x 2.24in x 1.57in)
Weight
350g (0.77lbs)
Package Content
1 x POE Injector 1 x Power Cable 1 x Quick Installation Guid
Power
30 Watts Max
90 Watts Max
Speed (Mbps)
10/100/1000 Mbps
10/100/1000 Mbps
Indoor
✓
✓
IEEE802.3bt
✓
IEEE 802.3 at/af
✓
✓
Output Power Voltage
54 Vdc Maximal
54-56 VDC
Requirements AC Input Current
0.8A@ 100-240 VAC
≤1.5A @ 100~240 VAC
Connect the device
In a network environment where it is not convenient to arrange the power supply, the POE Injector can be used to power network camera/APs and other devices through the network cable.
Compatible with multiple devices
Surveillance
Works with IP Cameras
Router
Works with WIFI access points
AP
Works with wireless access points
Videophone
Works with Videophone
Contrast
Gigabit PoE Injector speed can reach up to 1.0 Gbps faster data transmission,10 times faster than Non-Gigabit PoE Injector.
Product information
- Brand:Revotech
- Hardware interface:Ethernet
- Colour:Gigabit 90W Black
- Compatible devices:Internet Protocol Camera
- Item dimensions L x W x H:14.4 x 5.7 x 4 centimetres
- Data link protocol:IEEE 802.3u 100Base-Tx Fast Ethernet, IEEE 802.3 10Base-T Ethernet, IEEE 802.3af/at/bt Power over Ethernet, RJ-45 10/100/1000 Mbps
- Data transfer rate:1000 Megabytes Per Second
- Item weight:0.35 Kilograms
Related products to Gigabit 90W PoE++ Injector Adapter, IEEE 802.3bt PoE Standard 54-56V Active POE+ 10/100/1000Base-T, Plug and Play for Wireless Access Points/PTZ/Videophones:
![Amazon Basics RJ45 CAT5e High Speed Ethernet LAN Patch Cable 7.62 m / 25 Feet [1,000 Mbps (1 Gbps)]](https://m.media-amazon.com/images/I/61UU6FqVUzL._AC_SL640_.jpg)
Explore other categories
Other products from Network Switches:
