Home
Green DIY & Home Improvement
Regular Stores
Substores
Carbon Monoxide Detector - Carbon Monoxide Alarm - 85DB Alarm - Complies with Standard EN 50291

Carbon Monoxide Detector - Carbon Monoxide Alarm - 85DB Alarm - Complies with Standard EN 50291 by Amazon.co.uk

Price last update: 13/06/2025

View deal

• \u3010Light and Sound Alarm Warning\u3011: The electrochemial CO Monoxide Alarm When a dangerous level of carbon monoxide is detected the red LED will flash and the alarm pattern will sound 85-decibel alarm to protect your family's life loud warning upon detection
• \u3010Alarm Standards\u3011: the alert time depend the level of carbon monoxide concentration. 50ppm, alert within 60 to 90 minutes; 100ppm, alert within 10 to 40 minutes; 300ppm, alert within 3 minutes.
• \u3010High Quality\u3011 CO Alarm, Carbon Monoxide detector equipped with high accuracy and reliable long-life electrochemical CO sensor to detect CO leak quickly
• \u3010Widely Used&Installation\u3011 Battery operated installs without an electrician , more easily and quikcly mount on any wall or ceiling with included bracket,screws.Used for bedroom,living room ,kitchen room,bathroom,hotel
• \u3010Feature\u3011Power Supply: (DC3V) 2AAA size batteries.(Not included) Sensor Type\uff1aElectrochemical Gas Detection Type\uff1aCarbon Monoxide Material: ABS Test/Silence button keep you to test it easily.

Compare Carbon Monoxide Detector - Carbon Monoxide Alarm - 85DB Alarm - Complies with Standard EN 50291 with other products:

YZIF Carbon Monoxide Detector CO Alarm Detector with Digital...

FireAngel Carbon Monoxide Alarm

Carbon Monoxide Detector with EN50291, Portable Co Detector ...

Currently Unavailable

Fireangel CO-9B Carbon Monoxide Alarm, Kitemark Approved, 7 ...

Description

Introduction to Carbon Monoxide Alarms
"Test/Reset" button ("Test/Reset") This button allows to test the alarm every week and reset it (<200PPM) in case of alarm.Ventilation ports: Carbon monoxide enters the detection chamber through the cavity between the face and the lower housing of the alarm. To allow good air circulation, do not install the alarm in a very dirty, dusty or greasy place.Buzzer: The volume is high, 85 decibels, to alert you of a potential danger.
the alert time depends on the carbon monoxide concentration level.
50 ppm, alert within 60 to 90 minutes;100 ppm, alert within 10 to 40 minutes;300 ppm, alert within 3 minutes.
LED indicator operation
GREEN LED: The green LED flashes every 40 seconds to indicate the unit is working properlyRed LED: when a dangerous level of carbon monoxide is detected, the red LED flashes and the alarm soundsLCD solubility: 000-999PPM"Lb" on LCD display indicates low battery (requires replacement)"Err" Contact seller to change product
Installation method and function
Mounting bracket ON/OFF
Move the bracket up and down, remove the bracket, please remove the mounting bracket from the carbon monoxide detector
Charge the battery
Please install a 2AAA type battery (1.5V X 2), until the detector beeps short
Test/Reset button
Please press the "Test" button, "000" ppm will show on the LCD screen, red, flashing green light, sound beep.Indicates that carbon monoxide alarm is normal
Widely used
ceiling mounted/wall mount
Install screws,Widely used in home/home/office/car and so on
Specification
Standard
EN50291
power supply
(DC3V) 2AAA size batteries (not included)
Sensor Type
electrochemical
Gas Detection Type
Carbon monoxide
Standby Current
<80uA
Alarm current
<80mA
Noise level
≥85 dB to 1 meter (3.28 feet)
Alarm output
Sound and visual indication
Product Weight
115 g
Product Size
90mm*35mm
what is the package included?
1-piece CO alarm + 1-piece user manual + 2-piece screws
How to use it well?
Step 1: Move the mounting bracket down or up in parallel from the detector Step 2: Put the battery for type 2AAA (DC3V) Step 3: Press the test/reset button to test whether it works normally or not for LCD display and sound Step 4: Install on wall or ceiling according to your requirement