Description
The self adhesive hooks maintain a modern style, an elegant stainless steel look gives a stylish touch. The appropriately high quality adhesive is extremely strong and also waterproof.The adhesive tissue shelf is easy to install, without assistance of glue, drilling nor screws. Specifications: Material: 304 Stainless Steel Surface: Brushed Backside: Self-adhesive Packing :8* Self Adhesive Hooks How to Install? Wipe the walls or surface with a clean soft cloth, then wait until the surface is fully dry.Remove the protective film from the back, stick the hook in the correct position, and press the entire adhesive surface with your hand. To make it stronger, it is recommended to heat the adhesive with a hair dryer before installation. Please use the Self Adhesive Hooks after you install them for 24 hours. Warm Tips: 1. Make sure the surface is dry with no dust, water or oil remaining. 2. Do not use in too low temperature environment (lower than 41℉ ).If the temperature is too low, please use a hair dryer/heater to heat the double-sided tape surface for re-activating the stickiness of glue. 3. Please avoid the tile joints when installing. Not suitable for painted wall, drywall, wallpaper and rough surfaces. 4. Do not hang overweight, expensive or fragile products. 5. Once you stick it on the surface, it is not recommended to remove and paste it again. This will reduce the stickiness. We has been committed to the household articles for daily use ideal, focusing on creative product design, warmth, simplicity, and enjoying the pleasure of your life. and works closely with manufacturers to deliver products of the highest quality. Each product goes through rigorous quality control checks and inspections before packaging.
