Plastic Welder Kit Hot Stapler - BELEY Adjustable 25W 65W 100W Plastic Repair Welding Machine, 220V Car Bumper Plastic Fixing Tool with 600pcs Staples by Amazon.co.uk
Description
BELEY Plastic Repair Welding Machine is specially designed for auto body and plastic repair. The refined volume, and the design of the separation of the welding head and the power machine, make the work easier. The power of three gears can be adjusted freely, and the maximum power of 100W can help you quickly repair cracks in plastic products such as car bumpers, helping you save costs.
3 GEARS POWER ADJUSTABLE
The BELEY DIRECT Newly released a upgraded version of the hot stapler that supports three kinds of adjustable powers (25W/65W/100W). We have optimized and upgraded materials, appearance, functions, etc. Adopting a special heating design, the heating effect of 25w is better than that of the mainstream 100w in the market.
The BELEY Store included four types of plastic welder. You can also choose the plastic welding machine that suits you according to your needs. For details, please visit the BELEY Store.
With Heat Dissipation & Long time Repair Plastic Function
The main engine of our hot stapler is separate from the welding torch. And the heat dissipation of the host with the punched plate is better than that of the hand-held plastic welding machine, which solves the problem that the hand-held cannot dissipate heat. Meanwhile, the rubber handle of the hot stapler kit is lightweight and hand feel and drape, allowing long hours of comfortable restoration work.
High Quality Thicker Connection Cable
This adjustable power plastic welding kit machine wire diameter of 10mm, power cord diameter is 7mm, the connection wire is thicker and stronger than that of the 100W plastic welding kit so that it can support plastic repair work in higher current environments while repairing safely and efficiently.
Wide Compatiblity
The Plastic Welding Gun Machine is Suitable for repairing plastic parts on household plastic tools, automobiles, motorcycles, ATVS, and boats, such as bumper covers, headlight accessories and components, face plate clamps, plastic pins, spoilers, inner fenders, lower valance splash pans and even the plastic shell of door mirrors, etc.
Product Details
Warning: When cutting staple forks, wear safety goggles and keep your hands on the staples to prevent injury from sputtering the cut section.
Kindly Note:
1. Before disassembling the main unit, please plug out the lead cable.
2. The operations of servicing can only be controlled by qualified technical and.
3. Be careful: high risk of burns. The staples can reach a very high temperature and remain hot 5 seconds after having stopped the machine.
4. Don't perform hot stapler operations in very wet areas or on a wet floor.
5. Make sure that the operator has no contact with the staples to be welded without any protection.
6. Don't weld in an atmosphere full of inflammable gas or fuel steam.
7. It is necessary to make regular preventive maintenance.
8. Don't weld with worn-out cables.
9. Switch off the unit before replacing the staples.
10. The welding material must be degreased and cleaned to limit the toxic gas during the welding process.
Operation Steps:
1. Clean clean surfaces from plastic cracks and sand paint, if any (avoid heating paint to produce harmful substances).
2. According to the crack, choose the appropriate staple to install on the copper rod (generally placed in the front position will meet most maintenance needs, unless you need a relatively low temperature).
(Note: do not press the switch during binding).
3. Power can be selected according to model thickness. , the higher the power, the faster the heating, and the highest 100W fast heating.
4. Press the switch, heat the staple, and release it.
5. Quickly press the staples into the plastic case. Allow to cool slightly to remove the torch.
6. Wait for it to cool down, and clip off the staple with the supplied diagonal cutter.
7. According to your needs, using the metal scraper can smooth the plastic, making the repair more beautiful.
Packing List:
1* Plastic Fix Welder
1*Diagonal pliers
1*Scraper
1*English Manual
1*Plastic box
100pcs RS16 0.6mm100pcs RS18 0.8mm100pcs RS26 0.6mm100pcs RS28 0.8mm100pcs RS38 0.8mm100pcs RS46 0.6mm
Technical Parameters:
Output voltage: 1.9-3.9V
Rated Voltage: 220V
3 Gear Adjustment Power: 25W 65W 100W
Frequency: 50/60Hz
Rated Current: 0.3 A
Staples diameter: 0.6-0.8mm
Net weight: 2.8 kg/6.2lb
Product size: 165X100X140mm/65inX39inX55in
Voltage
220V
220V
220V
Heating Power
100W 65W 25W
20W
30W
Adjustable Power
3 levels heating power
3 levels heating power
5 adjustable levels
Hot Staples Quantity
600PCS
700PCS
600PCS
Vents of Heat Dissipation
Yes
Yes
Yes
Handle
Yes
Yes
Yes
1PCS Scraper
Yes
Yes
Yes
Product information
- Manufacturer:BELEY
- Package Dimensions:28.9 x 23.2 x 14.2 cm; 3.34 Kilograms
- Colour:Cadmium Green
- Batteries Required?:No
- Item Weight:3.34 kg
Related products to Plastic Welder Kit Hot Stapler - BELEY Adjustable 25W 65W 100W Plastic Repair Welding Machine, 220V Car Bumper Plastic Fixing Tool with 600pcs Staples:
Explore other categories
Other products from Welders:
