Glvaner M3.5 x 9.5mm Truss Head Phillips Drive Wood Screws, 304 Stainless Steel 18-8, Mushroom Head Self Tapping Screws, Bright Finish, Pack of 100 by Amazon.co.uk

Price last update: 13/06/2025
  • Thread Size: #6 ( 3.5mm); Thread Length: 3/8 inch ( 9.5mm)
  • Package: 100 PCS; Phillips Drive Size: #2

    Description

    Truss Head Self Tapping Screws/ Wood Screws
    The truss head self tapping screws have wide and slightly rounded heads, which show perfect performance for securing materials. The wide base of the head acts as a small washer allowing for a more evenly distributed load. If you are looking for a slightly raised screw head look, this is the one for you.
    Also called as mushroom head wood screws.
    Countersunk Head Self Tapping Screws/ Wood Screws
    With the clean and bright countersunk head, the screws can quickly grasp and enter the object at the location you choose and screw it in quickly and safely. Perfectly for occasions where the head is not allowed to be exposed.
    You can drive these screws into softwood and plywood without drilling a pilot hole. For hardwoods, a pilot hole is still recommended.
    Pan Head Self Tapping Screws/ Wood Screws
    With the clean and bright pan head, the screws can quickly grasp and enter the object at the location you choose and screw it in quickly and safely. Perfectly for occasions where there is limited space on the mating surface.
    You can drive these screws into softwood and plywood without drilling a pilot hole.
    Wafer Head Self Drilling Screws
    The wafer head self drilling screws have a sharp point to drill in wood and metal sheet without the need to pre-drill., and coarse thread design to help grab into metal studs.
    The length of the drill point determines the material thickness which the screw can reliably penetrate. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined.
    Truss Head
    Countersunk Head
    Pan Head
    Wafer Head
    Stainless Steel 304
    304 stainless steel (A2) and no exterior finish, greater strength and corrosion resistance performance than regular stainless steel or zinc plated fasteners.
    Wide Application
    The self tapping point can easily pass through a variety of materials, such as plastics, wood, metal, etc., suitable for mechanical industry, office appliance, home decoration and other furniture repairs. Great for both indoor and outdoor projects.
    Various Size Choice
    M2.9*6.5mm-38mm
    M3.5*6.5mm-50mm
    M4.2*9.5mm-65mm
    M4.8*9.5mm-65mm
    M6.3*13mm-75mm
    More Details
    Size Range
    2.9mm (No.4) / 3.5mm (No.6)/ 4.2mm (No.8)/ 4.8mm (No.10)/ 6.3mm (No.14)
    Scew Length Range
    6.5mm to 100mm (Send email if you need longer screw lengths)
    Screw Length Measured
    Please Pay attention that the screw length contains the tip point and does not contain the head. It's measured from under the head.
    Feature
    Deep phillips drive ensures the bit fit deep and help reduce stripping. Widely used as wood, plastic, fiberglass and sheet metal screws
    Standard
    JISB1122T
    Thread Type
    Deep, thick coarse threads help quickly fasten the screw, but increases its holding ability in softer materials such as MDF boards.
    Thread Size
    2.9mm No.4
    3.5mm No.6
    4.2mm No.8
    4.8mm No.10
    6.3mm No.14
    2.9mm No4
    Material
    Stainless Steel 304
    Stainless Steel 304
    Stainless Steel 304
    Stainless Steel 304
    Stainless Steel 304
    Stainless Steel 304
    Length Range
    6.5mm-50mm
    9.5mm-50mm
    9.5mm-65mm
    9.5mm-65mm
    13mm-75mm
    6.5mm-50mm
    Drive Size
    Phillps #1
    Phillps #2
    Phillps #2
    Phillps #2
    Phillps #3
    Phillps #1
    Thread Size
    4.2mm No.8
    M4.8mm No.10
    M4.8mm No.10
    M6-1.0
    M10-1.5
    M4.8mm No.10
    Material
    Stainless Steel 410
    Stainless Steel 304
    Stainless Steel 410
    Stainless Steel 304
    Stainless Steel 304
    Stainless Steel 410
    Length Range
    13mm-50mm
    9.5mm-65mm
    9.5mm-65mm
    8mm-80mm
    16mm-100mm
    9.5mm-75mm
    Drive Size
    Phillips #2
    Phillips #2
    Hex Drive 8mm
    Hex Drive 4mm
    Hex Drive 10mm
    Phillips #2

    Product information

      • Material:Stainless Steel
      • Drive system:Phillips
      • Head style:Truss
      • Exterior finish:Stainless Steel
      • Point style:Self Tapping
      • Manufacturer:Glvaner
      • Part number:UKG72020-100
      • Item Weight:110 g
      • Package Dimensions:11 x 10 x 1.8 cm; 110 Grams
      • Manufacturer reference:UKG72020-100
      • Size:M3.5 x 9.5mm (100 pcs)
      • Colour:Silver
      • Head Style:Truss
      • Measurement System:Metric, Imperial
      • Batteries included?:No
      • Batteries Required?:No

      Related products to Glvaner M3.5 x 9.5mm Truss Head Phillips Drive Wood Screws, 304 Stainless Steel 18-8, Mushroom Head Self Tapping Screws, Bright Finish, Pack of 100:

      Glvaner M3.5 x 9.5mm Truss Head Phillips Drive Wood Screws, 304 Stainless Steel 18-8, Mushroom Head Self Tapping Screws, Bright Finish, Pack of 100
      Glvaner M3.5 x 9.5mm Truss Head Phillips Drive Wood Screws, 304 Stainless Steel 18-8, Mushroom Head Self Tapping Screws, Bright Finish, Pack of 100 by Amazon.co.uk
      Price last update: 13/06/2025